Description:

Water based decorative coating for interiors. Based on acrylic resin, glass spheres and metal pigments, to realize various textures.The simplicity of the application allows for multiple effects, depending on the technique, the tools and the colors used. The walls, thus decorated, are distinguished by the brightness and depth of the drawing, making each environment precious and unique.

Surface treatment:

All plaster, lime, and solid surfaces are suitable. After cleaning and if possible grouting or shaving the support, apply CeboFix R with roller, diluted at 20% with water and colored in the same finishing tint, in one or two hands, until the complete coverage of the surface.

Add Ons:

Application cycle for Cometa effect:

Apply one uniform coating of CeboSfera with the Shark trowel, using its notched edge and moving it diagonally, then make a point of smoothing the product with the straight edge of the same tool. While the product is still wet, use the CeboSign tool to scrape the surface slightly, creating short diagonal porous streaks that will divide smoother and more compact bands; use the Caress spatula on the freshly decorated area to remove the product in excess.

Application cycle for Cosmo effect:

Apply CeboSfera in one hand, with the stainless steel trowel and crossed movements: before complete drying, re-finish the surface with the unloaded trowel, to smooth the design and eliminate any accumulation of product. To achieve a more smooth and homogeneous effect, after drying of first hand (6-8 h), apply a second hand of CeboSfera with the same application modes used before.

Application cycle for Nebula effect:

Apply one uniform coating of CeboSfera with the Shark trowel, using its notched edge and making a point of smoothing it with the straight edge of the same tool. Use the CeboSign tool in circular strokes, making lines on the surface, then, while it is still wet, use the Caress spatula to smooth it gently, following the direction of the pattern.

Application cycle for Onda effect:

Apply one uniform coating of CeboSfera with the Shark trowel, using its notched edge and making a point of smoothing it with the straight edge of the same tool, then proceed as follows: use the “Onda 4” trowel to make lines on the surface, following the chosen direction (horizontal or vertical), then, while it is still wet, use the Caress spatula to smooth it gently, following the direction of the pattern. It is advisable to spread and work the product in bands of about 1 metre wide.

Application cycle for Zeffiro effect:

Apply one uniform coating of CeboSfera with the Shark trowel, using its notched edge and moving it horizontally or vertically, then make a point of smoothing the product with the straight edge of the same tool. Use the CeboSign tool to make lines on the surface, following the chosen direction (horizontal or vertical),
then, while it is still wet, use the Caress spatula to smooth it gently, following the direction of the pattern. It is advisable to spread and work the product in bands of about 1 metre wide. For a more regular and soft striped effect use Zenith brush in the same way as CeboSign tool.

Application cycle for Zenith effect:

Apply one uniform coating of CeboSfera with the Shark trowel, using its notched edge and moving it horizontally, then proceed as follows: use the Zenith brush to make horizontal lines on the surface. It is advisable to spread and work the product in bands of about 1 metre wide. Wait for the product to dry, then apply a second coating, using the same method used to apply the first one and making vertical lines.

Color:

Application Methods :

Video :